Blog > Earthquake Zones in Woodside: Liquefaction, Landslide and Fault Zones by Neighborhood

Earthquake Zones in Woodside: Liquefaction, Landslide and Fault Zones by Neighborhood

by Eric & Janelle Boyenga

Twitter Facebook Linkedin

The California Geological Survey maps three kinds of earthquake zones: Seismic Hazard Zones for liquefaction and for earthquake-induced landslides, and Alquist-Priolo Earthquake Fault Zones. A zone is a mapped area where a site study is required before new building. It isn’t a prediction. We checked the parcel center of every single-family lot inside our 8 Woodside neighborhood guides against the state’s zone maps and counted, guide by guide, how many fall in each zone. The zone maps and the parcel records are as published in October 2026. There are no addresses here.

The short answer

Next steps in Woodside

Neighborhood by neighborhood

Counted single-family lots inside each guide’s outline whose parcel center is in each zone, sorted by the share in any of the three. A single-family lot can sit in more than one zone, so the zone columns can add up to more than “any of the three.” Some outlines overlap, so a single-family lot can count in two guides.

NeighborhoodSingle-family lotsLiquefaction zoneLandslide zoneFault zoneAny of the threeShare in any zone
Kings Mountain & Skyline4803503573%
Kings Mountain Road & Cañada Road34278727220159%
Skywood, Portola Hills & Skylonda44614246626259%
Mountain Home Road & Portola Road2296376410948%
Central Woodside & Town Center173271494124%
Emerald Lake (Town of Woodside)19504504523%
Woodside Hills & Woodside Heights4504260307%
Woodside Glens2430120125%

What the zones mean

  • Liquefaction zones are areas where the state’s maps show ground and groundwater conditions, typically loose, water-saturated sand or silt near the Bay and along creeks, under which the soil can lose strength in strong shaking.
  • Earthquake-induced landslide zones are hillside areas where the state’s maps show slopes that could slide in strong shaking.
  • Alquist-Priolo Earthquake Fault Zones are drawn around faults the state considers active, such as the San Andreas and Hayward faults.
  • What the zones require. Under the Seismic Hazards Mapping Act, cities and counties generally require a site-specific geotechnical report before approving new building in a liquefaction or landslide zone. In a fault zone, a geologic investigation is usually required before new construction, and new buildings for people generally can’t go across an active fault trace.
  • A map, not a prediction. A zone marks where the state wants a closer look before building. It doesn’t rate a particular house, and the maps don’t show where shaking would be strongest.

What it means for buyers and sellers

  • Sellers disclose it. California’s Natural Hazard Disclosure statement says whether a property is in a Seismic Hazard Zone or an Alquist-Priolo Earthquake Fault Zone. Ask for the report early in a purchase.
  • Check the official map for the address. The California Geological Survey’s EQ Zapp map shows the zones for any address; this post counts by neighborhood, not by address.
  • Ask your inspector and your insurer. A home inspector, and for the ground a geotechnical engineer, can speak to a specific house and lot. An insurance agent can quote earthquake coverage, which is a separate policy.
  • Planning a project? The town’s building department can tell you whether a remodel or addition needs a geotechnical or geologic report.

How we counted

  • Neighborhoods: the outlines drawn for our 8 Woodside neighborhood guides. They’re approximate, and some overlap, so the rows aren’t added into a town total. They cover our guides, not every part of Woodside.
  • Homes: lots zoned or coded single-family (these records identify the lot, not the house on it), from the San Mateo County parcel layer (use codes as of June 2020). Condos, townhomes and apartments aren’t counted.
  • Zones: the California Geological Survey’s regulatory maps as published in October 2026: Seismic Hazard Zones for liquefaction and earthquake-induced landslides, and Alquist-Priolo Earthquake Fault Zones.
  • The center of each parcel. A single-family lot counts in a zone when its parcel’s center is inside it, so a lot that only touches a zone isn’t counted. The zone describes the land, not the house on it.
  • Not evaluated. The state lists part of Skywood, Portola Hills & Skylonda as not evaluated for liquefaction or landslide zones (13 of its 446 single-family lots), so those two counts can’t include that part. Fault zones are mapped everywhere in our guides.
  • Maps change. The state revises its zone maps, so check the current map for a specific address.

Sources

Questions we hear

Is Woodside in an earthquake zone?

Parts of it are on the state’s maps. All 8 of our Woodside neighborhood guides have at least one counted single-family lot in a liquefaction, landslide or fault zone, though the share varies a lot from one guide to the next. The maps mark ground where the state requires a site study before new building. They don’t map shaking.

What does a zone mean for a home I’m buying?

It means the property is on a state map, so the seller’s Natural Hazard Disclosure statement will say so, and any new building on the lot would need a site study first. It doesn’t say anything about the house itself. A home inspector, and for questions about the ground a geotechnical engineer, can tell you about a specific property, and an insurance agent can quote earthquake coverage.

How do I check one address?

Look it up in the California Geological Survey’s EQ Zapp map, and read the Natural Hazard Disclosure report for the property. We’re glad to pull both for a home you’re considering.

Does a zone stop me from remodeling?

Not usually. The rules mainly apply to new construction and larger projects, which may need a geotechnical or geologic report first. The town’s building department can say what applies to a specific project.

Why isn’t there a town total?

Some guide outlines overlap, so a single-family lot inside two outlines counts in both. Adding the rows would count those twice, so we show each guide on its own. The table also covers our guide outlines only, not every part of Woodside.

Go deeper

Buying or selling in an earthquake zone?

We’re the Property Nerds, the Boyenga Team at Compass, recognized as NextGenAgents by a national real estate portal. We can pull the zone map, the disclosure report and the recent sales closest to a specific home before you write an offer or set a price. Call (408) 373-1660 or (650) 383-8606, or book a strategy call. Commissions are negotiable, and we offer bundled services, so ask us what’s included.

Questions about this post? Ask a Property Nerd.

Message

Message

Name

Name

Phone*

Phone

By checking this box, I agree by electronic signature to the Electronic Disclosure Consent Agreement; to receive recurring marketing communication from Boyenga Team / Compass, including auto-dialed calls, texts, and artificial/prerecorded voice messages (message frequency varies; data rates may apply; reply "STOP" to opt-out of texts or "HELP" for assistance); and to the Terms of Service and Privacy Policy of this website. Consent not required to make a purchase. I understand that I can call to obtain direct assistance.