Earthquake Zones in Campbell: Liquefaction, Landslide and Fault Zones by Neighborhood

The California Geological Survey maps three kinds of earthquake zones: Seismic Hazard Zones for liquefaction and for earthquake-induced landslides, and Alquist-Priolo Earthquake Fault Zones. A zone is a mapped area where a site study is required before new building. It isn’t a prediction. We checked the parcel center of every house inside our 12 Campbell neighborhood guides against the state’s zone maps and counted, guide by guide, how many fall in each zone. The zone maps and the parcel records are as published in October 2026. There are no addresses here.

The short answer

• Liquefaction zones: 10 of our 12 Campbell guides have houses in a liquefaction zone. The most are in White Oaks (162 of 406 houses, 40%), Campbell Village (122 of 496 houses, 25%) and Sunnyoaks (94 of 275 houses, 34%).
• Landslide zones: no counted house in any of our 12 Campbell guides sits in an earthquake-induced landslide zone.
• Fault zones: no counted house in any of our 12 Campbell guides sits in an Alquist-Priolo fault zone.
• None in any of the three zones: Downtown Campbell and Pruneyard–Dry Creek.

Neighborhood by neighborhood

Counted houses inside each guide’s outline whose parcel center is in each zone, sorted by the share in any of the three. A house can sit in more than one zone, so the zone columns can add up to more than “any of the three.” Some outlines overlap, so a house can count in two guides.

What the zones mean

• Liquefaction zones are areas where the state’s maps show ground and groundwater conditions, typically loose, water-saturated sand or silt near the Bay and along creeks, under which the soil can lose strength in strong shaking.
• Earthquake-induced landslide zones are hillside areas where the state’s maps show slopes that could slide in strong shaking.
• Alquist-Priolo Earthquake Fault Zones are drawn around faults the state considers active, such as the San Andreas and Hayward faults.
• What the zones require. Under the Seismic Hazards Mapping Act, cities and counties generally require a site-specific geotechnical report before approving new building in a liquefaction or landslide zone. In a fault zone, a geologic investigation is usually required before new construction, and new buildings for people generally can’t go across an active fault trace.
• A map, not a prediction. A zone marks where the state wants a closer look before building. It doesn’t rate a particular house, and the maps don’t show where shaking would be strongest.

What it means for buyers and sellers

• Sellers disclose it. California’s Natural Hazard Disclosure statement says whether a property is in a Seismic Hazard Zone or an Alquist-Priolo Earthquake Fault Zone. Ask for the report early in a purchase.
• Check the official map for the address. The California Geological Survey’s EQ Zapp map shows the zones for any address; this post counts by neighborhood, not by address.
• Ask your inspector and your insurer. A home inspector, and for the ground a geotechnical engineer, can speak to a specific house and lot. An insurance agent can quote earthquake coverage, which is a separate policy.
• Planning a project? The city’s building department can tell you whether a remodel or addition needs a geotechnical or geologic report.

How we counted

• Neighborhoods: the outlines drawn for our 12 Campbell neighborhood guides. They’re approximate, and some overlap, so the rows aren’t added into a city total. They cover our guides, not every part of Campbell.
• Homes: single-family houses as the parcel records identify them, from county assessor records published by the City of Campbell. Condos, townhomes and apartments aren’t counted.
• Zones: the California Geological Survey’s regulatory maps as published in October 2026: Seismic Hazard Zones for liquefaction and earthquake-induced landslides, and Alquist-Priolo Earthquake Fault Zones.
• The center of each parcel. A house counts in a zone when its parcel’s center is inside it, so a lot that only touches a zone isn’t counted. The zone describes the land, not the house on it.
• Maps change. The state revises its zone maps, so check the current map for a specific address.

Sources

• California Geological Survey, EQ Zapp: California Earthquake Hazards Zone Application (the official zone map by address).
• California Geological Survey, Seismic Hazards Mapping Act (liquefaction and earthquake-induced landslide zones).
• California Geological Survey, Alquist-Priolo Earthquake Fault Zoning Act (fault zones).
• Parcels: County assessor records published by the City of Campbell.
• The same counts are on our Earthquake Zones by Neighborhood page and in dataset PN-DS-29 in the Property Nerds Data Library.

Questions we hear

Is Campbell in an earthquake zone?

Parts of it are on the state’s maps. In 10 of our 12 Campbell neighborhood guides, at least one counted house sits in a liquefaction, landslide or fault zone; the table shows which and how many. The maps mark ground where the state requires a site study before new building. They don’t map shaking.

What does a zone mean for a home I’m buying?

It means the property is on a state map, so the seller’s Natural Hazard Disclosure statement will say so, and any new building on the lot would need a site study first. It doesn’t say anything about the house itself. A home inspector, and for questions about the ground a geotechnical engineer, can tell you about a specific property, and an insurance agent can quote earthquake coverage.

How do I check one address?

Look it up in the California Geological Survey’s EQ Zapp map, and read the Natural Hazard Disclosure report for the property. We’re glad to pull both for a home you’re considering.

Does a zone stop me from remodeling?

Not usually. The rules mainly apply to new construction and larger projects, which may need a geotechnical or geologic report first. The city’s building department can say what applies to a specific project.

Why isn’t there a city total?

Some guide outlines overlap, so a house inside two outlines counts in both. Adding the rows would count those twice, so we show each guide on its own. The table also covers our guide outlines only, not every part of Campbell.

Go deeper

• Earthquake Zones by Neighborhood has the same counts for all of our neighborhood guides, with a sortable table.
• Campbell Neighborhoods Compared puts these zones next to lot sizes and flood and fire zones.
• Campbell Neighborhoods by Their Houses.
• Campbell Housing Market by the Numbers has recent sale prices.
• Flood & Fire Zones by Neighborhood counts FEMA flood and CAL FIRE fire zones the same way.
• Disclosure Decoder walks through the Natural Hazard Disclosure and the other seller disclosures.
• Earthquake Retrofit Grants explains the state’s Brace + Bolt program and which local ZIP codes are on its list.
• Insurance Lab covers which policies a California home needs, earthquake coverage included.

Buying or selling in an earthquake zone?

We’re the Property Nerds, the Boyenga Team at Compass, recognized as NextGenAgents by a national real estate portal. We can pull the zone map, the disclosure report and the recent sales closest to a specific home before you write an offer or set a price. Call (408) 373-1660 or (650) 383-8606, or book a strategy call. Commissions are negotiable, and we offer bundled services, so ask us what’s included.